Technical Specifications
- Power: 60W
- Material: Anti-static soldering iron, high temperature silicone line
- Tip model: 900M
- Temperature range: 200-500 °C
- Heater model: A1321 (2.5-4.5Ω)
Temperature calibration
1. When the temperature of the tip is different from the actual measured temperature, the temperature can be calibrated. When the temperature of
the soldering iron is stable, use a soldering iron thermometer.
Measure the temperature of the tip and note the reading
2. Press “▼” to build (more than 1 second) until the LED digital bottom lights up and the water moves to indicate the temperature calibration mode.
Release the button to enter the temperature calibration value
3. Press the “▲▼” button to say that the LED display digital adjustment is the same as the reading you just recorded.
4. After the button is stopped for 6 seconds, the soldering station automatically stores the data into the chip memory. At this time, the LED digital
bottom stops the water and moves, and the soldering station resumes the normal soldering state.
Warranty:
6 Months
